Ad Code

Ticker

6/recent/ticker-posts

new keltec p50

New Keltec P50 - "Traditional" is a word not often used in the work of George Kellgren, Engineer and Designer of the Year 2019

The Golden Bullseye Innovator Award has shown time and time again that it thinks outside the box with its creations, from the Grendel P10 pistol to the current Kel-Tec line of bull rifles and shotguns. Just when you think Kellgren and Kel-Tec have it figured out, they seem to pull something new out of their hat. The latest example is the Kel-Tec P50, a large-format semi-automatic pistol recently chambered for NATO-standard 5.7x28mm FN ammunition that is anything but conventional in form and function.

New Keltec P50

New Keltec P50

Shown here (left to right): 9mm Luger, 5.7x28mm FN and 5.56 NATO cartridges. Note the minimum 5.7mm shoulder and relatively short overall length.

Kel Tec P50 5.7x28mm Semi Auto Pistol 50 Rounds Black

Although the P50 differs from other Kell-Tech firearms, the pistol has its roots in Kellgren's earlier designs, particularly those based on the .22 ramfire cartridge. In 1990, Kellgren's Grendel, Inc. P30 was a semi-automatic pistol chambered in 22 WMR and used a 30-round box magazine. This spawned a whole family of 30-round, .22 WMR firearms, including the R31 rifle, as well as a stockless, short-barreled version of the rifle, the pistol. Called the P31, this aircraft was designed to be carried and fired by a sling. In 2011, Kel-Tec updated the P30 concept when it introduced the 30-round PMR-30 pistol chambered in .22 WMR, followed by the CMR-30 carbine. This year, Kel-Tec upped its high-velocity .22 game with the P50, which sales director Derek Kellgren calls "the most innovative firearm yet." Here's why.

In 1990, Fabrique Nationale's P90 was introduced as a 5.7x28mm cartridge for personal defense. It was developed at the request of NATO, which was looking for a cartridge/gun combination to replace its current stock of 9mm pistols and submachine guns, capable of defeating soft body armor with armor-piercing bullets. Eight years later, FN released the Five-sevenN, a semi-automatic pistol chambered for ammunition. Although FN began offering the Five-Seven pistol to civilians in 2004, the following year released a semi-automatic, 16-inch muzzleloader P90 carbine version known as the PS90, almost two decades before it was chambered for 5.7mm ammunition. Widespread in the civilian market, it began when a few manufacturers other than FN introduced their FN 5.7x28mm firearms, including CMMG, Diamondback, and MasterPiece Arms. The Ruger-57 pistol went into production last year. New loads from the American Eagle Alliance brand, as well as Speer's Gold Dot self-defense line, have entered the 5.7mm ammo market. This ammo is more popular than ever, so adding a Kel-Tec ammo doesn't make sense. a shotgun in that cell.

The P50 is divided into four main sections for cleaning and maintenance. The magazine can be inserted or removed by pressing down on the release lever on the rear of the handle, raising the hinge from the receiver grip frame (insertion).

At the heart of the P50 is not only the FN P90 cartridge, but also the company's horizontal 50-round magazine. This polymer magazine stacks its bullets in a double column perpendicular to the bore axis of the firearm. A spiral feed chute rotates the wheels so they can be fed into the chamber. The magazine can be manually loaded without tools and is transparent so the user can monitor the remaining rounds. A magazine filled with 50 rounds adds a pound to the P50's overall weight. Designed to make the FN P90 a compact handheld, the magazine works similarly to the P50. The pistol is capable of holding 50 rounds without the width or height required for conventional cartridges or heavy cartridges of this capacity. In addition to FN, several aftermarket manufacturers make magazines for the P90, including ProMag Industries, which takes two ProMag magazines for the P50. Ten and 30 round magazines are available from FN for those who live in areas with local magazine restrictions.

P50 From Keltec

Like the FN P90, the P50 uses a direct recoil action in which the bolt sits on two guide rods that compress twin recoil springs as it moves backward. The mechanism is housed in a perforated aluminum receiver. The magazine is mounted on the back of the P90 and fed through the wheels. The fire control components are housed in a lower polymer housing that uses a grip shaped and textured similar to other Kel-Tec firearms.

The P50 is slightly smaller at 3 pounds, 8 ounces empty, about 2 pounds, 8 ounces lighter than the FN P90. The front of the trigger guard has a molded grip surface (like a pistol, you can't install a vertical grip and be NFA registered), then a 2.5" Picatinny rail for attaching lights, lasers, and other accessories. A 9" Picatinny rail on the top of the receiver. track section. The rail also features open sights such as height-adjustable front posts and windage-adjustable slotted rear blades. Radius of openings is 13".

The Kel-Tec P50 features two quick-detach sling attachment points on the pistol grip and rear of the receiver.

New Keltec P50

The P50 has two quick-detach sling attachment points, one on the pistol grip and one on the rear of the receiver, and the pistol has a nylon sling and swivel. To stabilize the pistol, the strap can be used not only for carrying, but also as a shooting aid, pushing against its tension. Unlike a single-point system, the pivoting position at the top and bottom of the pistol balances the tension for greater stability, making the pistol a very stable platform. Even without a sling, the fully loaded P50 balances well with a two-handed shooting grip.

New Csm P50 Pic Rail For The Keltec P50 From Custom Smith Mfgthe Firearm Blog

The Kel-Tec P50 optic rail includes a metal sight package that includes a height-adjustable front post (insert, arrow) and a windage-adjustable notch rear blade (r.).

To load the P50, a release lever at the rear of the grip is pushed down, allowing the receiver, which includes the barrel and action, to be cocked. A loaded magazine is engaged and the receiver closed (a motion reminiscent of the fun of breaking a top cover when loading a belt-fed rifle). The release handle moves like a beaver on the keyboard cage to prevent accidental operation. The P50 uses a T-shaped charging handle that pulls directly from the rear of the receiver. The P50 can be held close to the torso, reaching over the receiver for a semi-automatic pistol with a slide. Safety grips are located on the right and left sides of the grip and are easy to operate with the thumb, which, combined with the charging handle and release lever design, provides ambidextrous operation.

The P50 barrel has a 1/2x28 TPI thread, which allows for the attachment of accessories such as a YHM Turbo K suppressor, and the pistol comes with a thread guard (insert).

The P50's 9.60-inch barrel is just shy of the barrel length of FN's P90, meaning it delivers nearly the maximum performance the 5.7mm cartridge was originally designed for. Shooting from the P50 produced a 19 percent higher muzzle velocity (1.66 f/s vs. 1,980 f/s). ) and 41 percent more muzzle energy (348 ft. per 4.9" barrel than the Ruger-57 we tested last year. The P50's muzzle must be '1/2x28 TPI threaded to accept muzzle devices or suppressors, and the thread guard supplied.to the pistol.

Keltec P50 Side Folding Brace Adapter

The Kel-Tec P50 uses the FN P90 / PS90 magazine design, which is a 50-round magazine that sits horizontally on the pistol. But in this case, the box goes into the compartment.

While most users will no doubt use electronic optics on the P50, we chose to use the Weaver Classic 2.5-8X pistol scope. Not only did this complement the P50's stormy burst feel, but the magnified optics helped to achieve the pistol's most accurate results. Unlike most conventional center semi-automatic pistols, the P50's barrel is mounted on the receiver, and the scope is also firmly attached. Accuracy is aided by the P50's trigger. After the first use, and then a little creep, it breaks in at 3 pounds, 8 ounces. As a result of all of these factors, we averaged 5-shot groups of 0.75" at 25 yards. From the first round, the reliability was 100 percent, and the pistol performed very well with all types of ammunition.

Different

New Keltec P50

Ruger 556 review, vg6 epsilon 556 review, msar stg 556 review, sinn 556 review, sinn 556 i review, meridian 556 review, eotech 556 review, precor efx 556 elliptical review, benchmade 556 review, surefire sfmb 556 review, precor efx 556 review, sinn 556 anniversary review

Post a Comment

0 Comments

Recent Comments

Ad Code